TECHNICAL SPECIFICATIONS
PA10100 |
Diameter:
Frequency Response:
Power Handling:
Voice Coil Diameter:
Winding Width:
Impedance:
Connector:
Spider:
X-max:
Magnet:
Mounting Depth:
Cut-out Diameter: | 10” High Performance Midbass/Woofer
35Hz to 2500Hz
600 Watts RMS
3.0” BAA former with copper windings
1.25”
Available in 4-ohm and 8-ohm
Spring-loaded 8-gauge
6” flat progressive roll with woven leads
22mm peak-to-peak – 100% in the gap
Single 90-ounce Y-35 Ferrite
4.75”
9.125” |
RECOMMENDED ENCLOSURE
As a Midbass:
- .5 Cubic feet sealed with 1” of poly-fill on each inside wall except the baffle. 65Hz resonant frequency.
- .5 Cubic feet ported with a 2” round port x 6” long. 47Hz tuning frequency.
As a Mid-woofer:
- 25 Cubic feet ported with a 4” round port x 13” long. 40.6Hz upper tune.
- 50 Cubic feet ported with a 4” round port x 13” long. 37 Hz lower tune.
If these parameters are not sufficient, please do not hesitate to give us a call (561-799-3688) and we will be glad to help you build a custom tuned enclosure. We use LEAP exclusively for that “perfect” result!
